Tip of the Day 53: Set Fill Volume to get Good Viscosity

You have already read this, of course, but repetition is one of the 3 R’s in teaching.Here is an example of why it is important to set the fill volume. If the eDART does not know where fill is supposed to end then the only guess it can make is to use peak injection...

Tip of the Day 48: Viscosity Requires Ripeness

… a “ripe” process being one that you are done fiddling with.It appears that during process startup some people have been chasing the V1->V2 (in D3) or transfer position (D2) and trying to “Set Fill Volume” every time a change is made. The point here is that the...

Tip of the Day 45: Always Monitor Viscosity

Let me repeat: Always Monitor ViscosityWe have covered how to set the eDART’s fill volume eDART to get stable Effective Viscosity / Fill. This is the most fundamental number that represents the characteristics of the incoming material. It can vary with the way the...