Tip of the Day 118: The Sample Output

You will find, when you try to sample parts, that sometimes they are hard to catch. Some customers have the rejects going straight into the grinder. So using the “Reject” switch on the Part Sampling tool is not helpful. Others have the robot placing parts,...

Tip of the Day 49: Graphing Parts Measurements

If you have proceeded to do an experiment with part sampling (as in Tip # 34) and have entered your measurements with the Measurement Entry tool on the Analyzer then it is wise to check your entries using the Summary Graph. You can add the just entered measurements by...

Tip of the Day 44: Adding Part Sampling to the Main Menu

If you are not using the Summary Graph and want to add the Part Sampling tool to the eDART’s Main Menu then you can drag it onto the System space in the Architect. This works for any eDART tool that you might want to add to the main menu or remove from it (by dragging...