CoPilot® GO

Catch Bad Parts Faster Without Complex Machine Integration

CoPilot GO helps molders get up and running quickly, capture cavity pressure data with less setup friction, sort suspect parts in real time, and move from tool tryout to production faster.

Request a CoPilot GO Demo

Faster setup. Smarter part decisions. Less integration burden.

Built for the two moments when speed matters most

Use CoPilot GO to get useful cavity pressure insight faster during launch and sort suspect parts faster when quality is on the line.

Tool Tryouts

Get cavity pressure visibility sooner so your team can learn faster, make better process decisions earlier, and reduce delays between tryout findings and production readiness.

  • Shorten the path from setup to useful process insight
  • Make part-quality decisions with better visibility into cavity pressure behavior
  • Reduce friction between launch work and production handoff
Quality Containment

When part quality is in question, CoPilot GO helps teams act faster by using cavity pressure data to sort suspect parts in real time and contain quality risk before it spreads.

  • Separate suspect parts faster
  • Reduce dependence on slower manual containment workflows
  • Protect customers, production schedules, and downstream operations

1) Fast Setup

Get cavity pressure-based insight without the level of setup complexity that often slows traditional implementations. CoPilot GO is built for teams that need to get moving quickly.

2) Real-time part sorting

Use cavity pressure data to help distinguish good parts from suspect parts in real time, so bad parts do not keep moving downstream unnoticed.

3) Faster tryout-to-production handoff

Move from process learning to production action faster by using a simpler workflow for data capture, quality decision-making, and response.

When setup is slow, quality decisions slow down too

In high-pressure production environments, teams cannot afford to wait on long integration timelines or rely on delayed inspection feedback. When cavity pressure data is hard to capture or difficult to act on, tryouts take longer, quality containment slows down, and bad parts have more opportunity to slip through.

CoPilot GO is designed for speed where it matters most: setup, part sorting, and production readiness.

How CoPilot GO works

CoPilot GO gives molders a faster path from setup to part-level decisions by capturing cavity pressure data without requiring a machine interface, building pressure templates on the fly, and automating part sorting in real time.

Step 1: Connect

Step 2: Capture

Step 3: Sort

Connect without machine interface complexity

CoPilot GO is designed to be deployed without a machine interface, helping reduce setup time, implementation complexity, and cost. That gives teams a faster way to start using cavity pressure data in tool trials, troubleshooting, and containment situations.

Capture cavity pressure data and build templates

Once connected, CoPilot GO captures cavity pressure data in real time so teams can see what is happening inside the mold and establish pressure templates for acceptable part behavior. During tool trials, part data and templates can be captured on the fly to speed process learning and optimization.

Sort parts automatically and act faster

CoPilot GO uses cavity pressure-based analysis to help identify conditions associated with defects such as shorts and flash more efficiently. Automated part sorting then uses pressure templates to identify and separate suspect parts, helping teams contain bad parts faster and move into production with greater confidence.

CoPilot GO turns cavity pressure data into faster setup, faster defect detection, and faster good-part versus bad-part decisions.

Why teams choose CoPilot GO

CoPilot GO is built for molders who want the value of cavity pressure-based decision-making without the same level of integration burden often associated with traditional setups.

Lower setup friction

Lower setup friction

Get to useful cavity pressure insight faster with a simpler path from setup to process visibility.

Reduce the drag of heavier implementation approaches. CoPilot GO helps teams start learning from cavity pressure data sooner, so they can troubleshoot earlier and move into action with less setup burden.

Built for real molding environments

Built for real molding environments

Designed for production settings where speed, simplicity, and fast decision-making matter.

CoPilot GO is built for real plant conditions where teams need practical tools, not unnecessary complexity. It helps bring cavity pressure-based insight into everyday workflows without turning rollout into a major integration project.

Faster path to part decisions

Faster path to part decisions

Use cavity pressure data to separate good parts from suspect parts in real time, not just monitor the process passively.

Move from passive monitoring to faster action. CoPilot GO helps teams identify suspect parts sooner, strengthen containment, and reduce the risk of bad parts moving downstream.

Better handoff from launch to production

Better handoff from launch to production

Carry useful process insight from tool tryout into production with less rework, less guesswork, and faster decision-making.

Support a smoother transition from launch work into steady-state production. CoPilot GO helps teams preserve what they learn during tryout and apply it to faster, more repeatable production decisions.

See how CoPilot GO fits your process

Whether you are trying to speed up tool tryouts, contain suspect parts faster, or reduce the setup burden of cavity pressure-based monitoring, a demo is the fastest way to see how CoPilot GO fits your environment.

Talk to a Product Specialist

A faster path to cavity pressure-based quality action

CoPilot GO is for teams that want to move quickly from data capture to part decisions. Instead of positioning the system as a large implementation effort, the page should make clear that this is a practical tool for faster setup, faster containment, and a smoother path into production use.

  • Built for speed, not unnecessary complexity
  • Designed around real production and quality workflows
  • Helps teams act on cavity pressure data faster
  • A more specific next step than “request more information”
youtube placeholder image

Book a CoPilot GO demo

Tell us about your machine setup, current launch phase, or quality challenge. We’ll show you how CoPilot GO can help you get up and running faster and make better part decisions with less setup friction.

Common questions about CoPilot GO
How quickly can CoPilot GO be set up?
CoPilot GO is built for teams that need a faster path to useful cavity pressure data and real-time part decision support. Exact timing depends on the environment and use case, but the focus is reducing setup complexity and getting teams moving sooner.
Is CoPilot GO only for tool tryouts?
No. It is useful both during tool tryouts and during quality containment when you need to identify and sort suspect parts faster.
Do we need a major machine integration project?
CoPilot GO is positioned as a lower-friction way to capture cavity pressure data and act on it, especially for teams that want speed and simplicity rather than a heavier implementation path.
Can CoPilot GO help us sort good parts versus bad parts in real time?
That is one of the clearest jobs this page should communicate. CoPilot GO is meant to help teams use cavity pressure data to support real-time part sorting and faster containment action.
Will CoPilot GO fit our process?
The best next step is a demo conversation. Share your machine setup, use case, or quality challenge and RJG can help determine fit.
See if CoPilot GO Fits Your Process

Share your machine setup or current quality challenge and we’ll show how CoPilot GO fits.