Accuracy ±1.5% of Full Range
2-40 LPM
.5 to 10.6 GPM
(LPM) = [(38/3)*V] – (13/3)
(GPM) = [3.347*V] – 1.145
Operating Range 0 to 100 °C (32 to 212 °F)
Power Supply Requirements 5VDC ±5% (external)
max. 10 mV ripple, 50 Hz
separed from hazardous live circuitry by double or reinforced insulation power limitation: 150VA; current limitation: 8A
Flow Signal 0.5 – 3.5V
Temperature Signal 0.5 – 3.5V
Load Impedance > 10kΩ
Component Materials
1/2" Body Size Glass-Filled Nylon Flow Body with Brass End Caps
SKU: Y6UJ9A000592 Category: Tag:

Smartflow 1/2″ NPT 2-40 LPM

This device is a simple flow meter to measure either the total input to the mold or to individual circuits. This can also be done with water temperature. When interfaced with the eDART® System, users can access and use data such as: excessive reject control, summary variables, template values, and summary and cycle values.

What you can do:

  • Determine if the water temperature control unit is delivering the correct temperature needed to make good parts
  • Reject parts if the flow or temperature doesn’t meet your set requirements to make a good part
  • Create a template of the flow or water temperature
  • Overlay your GPM or temperature curves on the cycle graph
  • Set alarms around peak values of the flow or temperature of the coolant
  • Set excessive rejects to stop the machine if the flow or temperature of the coolant rejects parts more than your set thresholds

Catalog of Models


Interfacing With Other Modules


Interfacing with RJG's IA2-M-FT module