Why Part Weight Is Not a Reliable Measure of Injection Molding Quality  

For decades, part weight has been used as a quick check for quality in injection molding. It is simple, measurable, and easy to standardize across shifts and facilities.

But here is the problem: part weight does not tell you why a part is good or bad.

In today’s environment of tighter tolerances, complex materials, and leaner teams, that gap matters more than ever.

---

The Hidden Risk of “Good” Weight  

A molded part can hit its target weight and still fail:

• Dimensional requirements
• Functional performance
• Cosmetic standards
• Long-term durability

Why? Because weight is a lagging indicator.

It reflects the final outcome, not the process that created it.

Two parts with identical weights can have completely different:

• Molecular orientation
• Internal stress levels
• Packing conditions
• Cooling behavior

Those differences do not show up on a scale, but they do show up in the field as warp, flash, short shots, or premature failure.

---

What Weight Fails to Capture  

Injection molding is a dynamic process. Critical variation happens during:

• Fill phase → flow front behavior, hesitation, race tracking
• Pack and hold → material density, shrinkage control
• Cooling → dimensional stability and stress

It does not reveal:

•  Material viscosity shifts
• Temperature fluctuations
• Machine inconsistencies
• Cavity-to-cavity imbalance

Often, part weight can be used to show that something has changed, but not indicate exactly what that change was. It could be that the weight has changed due to a specific reason, but you will need to hunt down the root cause.

Cavity pressure and instrumentation make this a much easier task.

---

The Shift: From Outcome-Based to Process-Based Quality  

High-performing molding operations are moving away from inspection-based quality and toward process control.

At RJG, that shift starts with one key variable:

Cavity Pressure  

Unlike weight, cavity pressure tells you exactly what is happening inside the mold in real time.

It acts as a fingerprint for every cycle:

• How the material flows
• How it packs
• How it solidifies

With cavity pressure, you are no longer guessing based on external measurements. You are monitoring the physics that actually create the part.

👉 Explore RJG’s pressure sensor solutions:
https://rjginc.com/product-category/pressure-sensors/

---

The Overlooked Risk: Losing the Gains You Just Made  

This is where many organizations struggle.

They invest in:

• Better sensors
• Better data
• Better processes

They see real improvements.

But within months:

• Variation creeps back in
• Old habits return
• Process discipline erodes
• Results plateau or regress

Why?

Because technology alone does not sustain performance. People do.

---

Why Training Is the Multiplier and the Safeguard  

To truly move beyond weight-based thinking, your team needs more than tools. They need a shared understanding of process physics and control.

That is where training becomes critical.

RJG training ensures:

• Engineers understand why the process works
• Technicians can troubleshoot using data instead of guesswork
• Teams apply consistent methods across shifts and plants
• Knowledge does not leave with a single expert

Most importantly, it ensures you do not lose the gains you have already paid for.

👉 Find the right training path for your team:
https://rjginc.com/choosing-course-path/

---

What This Looks Like in Practice  

When technology, process, and training align:

• Pressure curves replace part weight as the primary quality signal
• Operators respond to process changes in real time
• Startups become faster and more repeatable
• Quality becomes embedded, not inspected

This is the foundation of sustainable, scalable performance.

---

Why the Industry Still Clings to Weight  

Weight persists because:

• It is easy to measure
• It is easy to explain
• It requires minimal training

But easy does not mean effective.

In today’s environment, it often means incomplete and risky.

---

The Bottom Line  

Part weight is not useless, but it is not enough.

If it is your primary quality metric, you are:

• Seeing results, not causes
• Reacting, not controlling
• Improving temporarily, not sustainably

The future of injection molding quality is built on:

• Real-time process visibility through pressure sensors
• Connected, actionable data with The Hub and CoPilot Go
• Proven methodologies through Smart Method
• Trained teams who can execute consistently

---

Resources to Build and Keep Process Control  

If you are ready to move beyond weight-based validation:

See inside your mold 
→ Shop pressure sensors
https://rjginc.com/product-category/pressure-sensors/

• Stop defects before they happen
  → Learn about CoPilot® Go
  https://rjginc.com/copilot-go/
• Connect and monitor your operation 
  → Learn about The Hub® for data control
  https://rjginc.com/the-hub-connect/
• Develop a robust process 
  → Ask about Smart Method consulting
  https://rjginc.com/smart-method/

Set the workforce up for long-term success
→ with  award-winning Training
https://rjginc.com/choosing-course-path/

---

.

Why Injection Molding Quality Issues Quietly Destroy Profitability  

Injection molding is one of the most efficient manufacturing methods for producing high volumes of plastic components. That efficiency only holds when the process runs consistently and predictably.

When quality issues appear, they rarely show up as a single obvious cost. Instead, they slowly reduce profitability through:

• Excess scrap and material waste
• Production downtime and troubleshooting
• Rework and manual inspection
• Tool damage and maintenance costs
• Delayed shipments and unhappy customers

Even small injection molding defects such as flash, warping, or short shots can affect structural performance, product reliability, and production efficiency if they are not addressed.

For plant leaders responsible for production efficiency, margins, and delivery performance, solving these issues is not only about quality. It is also about unlocking hidden ROI across the entire operation.

Below are five of the most common and costly injection molding problems and how to fix them before they impact your bottom line.

---

1. Short Shots: When the Mold Does Not Fill Completely  

What Is a Short Shot in Injection Molding?  

A short shot occurs when molten plastic does not fully fill the mold cavity, resulting in incomplete or partially formed parts.

The Hidden Cost of Short Shots  

Short shots create more than defective parts. They disrupt production flow and increase operational costs.

Common impacts include:

• Increased scrap rates
• Extra inspection and sorting labor
• Machine downtime for troubleshooting
• Higher material consumption
• Reduced first-pass yield

How to Fix Short Shots  

Modern molding operations reduce short shots by implementing:

• In-mold cavity pressure sensors
• Real-time process monitoring
• Optimized injection pressure and temperature
• Improved mold venting and runner design

By verifying that every cavity fills correctly, manufacturers reduce process variation and improve stability even when using recycled or variable materials.

ROI Impact:
Increasing first-pass yield reduces scrap, prevents cycle disruptions, and increases profit per shot.

---

2. Flash: Excess Plastic That Drives Hidden Labor Costs  

What Causes Flash in Injection Molding?  

Flash occurs when molten plastic escapes the mold cavity and solidifies along parting lines or mold edges.

The True Cost of Flash  

Flash may appear minor but it can create significant downstream costs:

• Manual trimming or secondary operations
• Increased labor costs
• Mold damage and wear
• Dimensional failures
• Customer returns or rejected parts

How to Prevent Flash  

Effective solutions include:

• Implementing Decoupled Molding® process control
• Monitoring cavity pressure
• Ensuring proper clamping force
• Maintaining mold alignment and tooling condition

Using advanced process control allows manufacturers to isolate fill and pack phases and prevent overpacking.

ROI Impact:
Reducing flash lowers labor costs, protects tooling investments, and improves cost of goods sold.

---

3. Sink Marks and Voids: Small Defects with Large Quality Risks  

What Are Sink Marks and Voids?  

Sink marks appear as surface depressions while voids are internal air pockets caused by uneven cooling or insufficient packing pressure.

These defects often occur in thicker areas of a part or regions with inconsistent wall thickness.

The Cost of Sink Marks and Voids  

These defects can be especially risky because they may not always be visible immediately.

Potential consequences include:

• Failed quality audits
• Product performance issues
• High scrap during production
• Increased warranty claims
• Loss of customer trust

How to Fix Sink Marks and Voids  

Solutions include:

• Monitoring pack pressure using in-mold sensors
• Optimizing cooling channel design
• Improving part geometry and wall thickness
• Controlling pack pressure and hold time

ROI Impact:
Preventing internal defects reduces scrap rates and protects product reliability in high-performance applications.

---

4. Burn Marks: Cosmetic Defects That Lead to Product Rejection  

What Causes Burn Marks in Injection Molding?  

Burn marks appear as dark discoloration or scorching on molded parts. They typically occur due to trapped gasses or excessive processing temperatures.

The Real Cost of Burn Marks  

Although often considered cosmetic, burn marks can become expensive when:

• Parts are visible to customers
• Color specifications are strict
• Production runs require tight quality standards

Burn marks often lead to:

• High reject rates
• Rework delays
• Process instability

How to Prevent Burn Marks  

Manufacturers can reduce burn marks by:

• Improving mold venting
• Adjusting injection speed
• Managing processing temperatures
• Maintaining consistent material quality

ROI Impact:
Lower reject rates improve output consistency and reduce cost per unit.

---

5. Warping: When Parts Lose Dimensional Accuracy  

What Is Warping in Injection Molding?  

Warping occurs when a molded part twists, bends, or distorts during cooling due to uneven shrinkage.

The Cost of Warped Parts  

Warped parts create serious downstream challenges including:

• Assembly failures
• Scrap and rework
• Increased tooling complexity
• Time spent identifying root causes

How to Prevent Warping  

Warping can often be prevented through:

• Uniform mold cooling
• Balanced material flow
• Consistent packing pressure
• Improved part design and wall thickness

ROI Impact:
Controlling warpage improves dimensional stability and supports faster downstream assembly.

---

What Are Injection Molding Defects Really Costing Your Operation?  

Many manufacturers underestimate how much profitability is lost through:

• Startup scrap
• Overprocessing
• Undetected process drift
• Manual quality checks
• Unplanned downtime

These inefficiencies accumulate across thousands or even millions of molding cycles.

When production teams gain clearer process insights, quality problems become opportunities to improve efficiency and recover lost margin.

---

How a Gap Assessment Can Reveal Hidden Profit Opportunities  

If your molding operation experiences recurring defects or unexplained production losses, a Gap Assessment can help identify the root causes.

A structured performance review evaluates:

• Process stability
• Machine capability
• Tooling condition
• Quality monitoring systems
• Production efficiency

The result is a clear roadmap to reduce scrap, stabilize processes, and improve profitability.

When every shot counts, quality is not just about the part. It is about protecting profit on every cycle.

---

Contact us to discuss your savings.

Introduction: What Does Autonomy Have to Do with the Foundations of DIII?

Automated injection molding has become a critical goal for manufacturers seeking higher consistency, reduced scrap, and greater production efficiency. As labor challenges grow and quality expectations rise, traditional operator-dependent molding processes struggle to keep up. Autonomous production concepts are no longer limited to robots or part handling; they now extend directly into process control itself.

One of the most effective ways automation is implemented at the process level is through RJG’s DECOUPLED MOLDING III, a scientific molding methodology that embeds automation into the molding cycle using sensors, data, and closed-loop control. Rather than relying on operator judgment or fixed time-based settings, this approach allows the molding process to self-regulate, adapting to real-time conditions inside the mold.

This article explains how DECOUPLED MOLDING III functions as a practical and proven form of automated injection molding, why it outperforms conventional methods, and how it supports repeatable, high-quality manufacturing in demanding environments

---

What Is Automated Injection Molding?  

Automated injection molding refers to a manufacturing process where critical molding decisions are made automatically based on real-time data instead of manual intervention. While automation is often associated with robotics, true process autonomy focuses on controlling how plastic fills, packs, and solidifies inside the mold.

Key characteristics of automated injection molding include:

• Sensor-based process monitoring
• Data-driven stage transitions
• Reduced operator influence
• Adaptive compensation for material and environmental variation

The reality is, everyone wants to experience the benefits of automation; but nobody wants to trust the success of their business 100% to robots (and rightly so). The good news is, DECOUPLED MOLDING III meets all of these criteria today by using scientific principles and cavity-level feedback to control each phase of the molding cycle independently.

---

Overview of RJG’s DECOUPLED MOLDING III  

RJG’s DIII represents the most advanced evolution of scientific molding available and is often referred to as the first real autonomous process control solution. It builds on earlier decoupled methods by introducing closed-loop cavity pressure control, which enables autonomous decision-making during the molding cycle.

Rather than treating injection molding as a single continuous event, Decoupled Molding III divides the process into three distinct, independently controlled stages. This separation is essential for achieving reliable automation and repeatability.

---

Process Decoupling: The Foundation of Autonomy  

First Stage: Velocity-Controlled Fill  

In the first stage, the mold cavity is filled to a predetermined volume at a constant injection velocity. This stage is decoupled from pressure, meaning the system focuses only on controlled flow, not force.

• Ensures uniform melt front advancement
• Reduces shear-related defects
• Establishes a consistent starting point for every cycle

Because the fill is controlled by position or volume rather than time, this stage already removes a major source of variability common in traditional molding.

---

Second Stage: Velocity-Controlled Pack  

The second stage is where DECOUPLED MOLDING III most clearly distinguishes itself—and where automated injection molding truly comes to life.

Instead of switching directly to pressure, the system applies a constant packing velocity until a target cavity pressure set-point is reached. This velocity-controlled pack phase allows the process to compensate automatically for polymer shrinkage and material variation.

Once the desired cavity pressure is achieved, RJG’s CoPilot® System sends a signal to the machine to transition into hold. This decision is not based on time or operator judgment, but on real, measured conditions inside the mold.

---

Third Stage: Hold Pressure  

The final stage applies a stabilizing hold pressure until gate freeze occurs. This ensures the part solidifies under controlled conditions, locking in dimensional stability and part consistency.

Because the earlier stages are already optimized and repeatable, the hold stage becomes a predictable and reliable final step rather than a corrective one.

---

How DECOUPLED MOLDING III Enables Automatonomous Injection Molding  

In-Cavity Pressure Sensors  

Cavity pressure sensors are the backbone of automation. They provide direct insight into what is happening inside the mold—something machine parameters alone cannot do.

These sensors:

• Detect exact melt behavior
• Trigger automatic stage transitions
• Provide real-time quality feedback

---

Scientific Switchover Logic  

In DECOUPLED MOLDING III, switchover from fill to pack occurs based on position and cavity pressure, not elapsed time. This scientific switchover removes human guesswork and ensures consistency across shifts, operators, and facilities.

---

Adaptive Compensation  

Automated injection molding must handle variation—and DECOUPLED MOLDING III excels here. The system automatically compensates for changes in:

• Resin viscosity
• Material lot variation
• Ambient or mold temperature
• Machine performance drift

This adaptive capability keeps parts within specification even when conditions change.

---

Advantages Over Traditional Injection Molding  

Exceptional Repeatability  

Each molding cycle mirrors the last because decisions are data-driven, not subjective. This level of repeatability is a defining feature of automated injection molding.

Reduced Process Variability  

By eliminating manual adjustments and time-based settings, variability is dramatically reduced.

Faster Validation and Qualification  

Scientific baselines minimize trial-and-error during setup, shortening validation timelines and accelerating time to production.

Improved Process Robustness  

Automated switchover and closed-loop control allow the process to remain stable despite external disturbances.

Increased Uptime and OEE  

By reducing quality-related downtime and scrap, manufacturers often see significant improvements in Overall Equipment Effectiveness (OEE).

---

Autonomous Injection Molding in Modern Manufacturing  

As manufacturers move toward Industry 4.0, automated injection molding plays a vital role in:

• Lights-out manufacturing
• Medical and automotive compliance
• High-volume, high-precision production

DECOUPLED MOLDING III aligns naturally with digital manufacturing strategies by generating reliable data and predictable outcomes.

---

Frequently Asked Questions (FAQs)  

1. Is automated injection molding the same as robotic automation?  

No. Robotic automation handles parts, while autonomous injection molding controls the molding process itself using data and sensors.

2. Do I need special machines to use DECOUPLED MOLDING III?  

No. Many standard injection molding machines can support it with proper sensors and control systems like RJG’s CoPilot.

3. How does cavity pressure improve automation?  

Cavity pressure provides real-time feedback, allowing the process to make automatic, accurate decisions.

4. Is DECOUPLED MOLDING III suitable for all resins?  

Yes. It is especially effective for materials sensitive to pressure, temperature, and shear variation.

5. Can this method reduce scrap rates?  

Absolutely. Consistent filling and packing significantly reduce defects and scrap.

6. Where can I learn more about scientific molding principles?  

RJG provides extensive resources and training on scientific molding methodologies. Ask for more details or request a consultation today.

---

Conclusion: The Future of Automated Injection Molding  

RJG’s DECOUPLED MOLDING III is more than a process refinement—it is a practical, proven implementation of automated injection molding. By embedding sensor-based intelligence and scientific control directly into the molding cycle, it enables manufacturers to achieve higher quality, greater efficiency, and unmatched consistency.As the industry continues to move toward smarter, more autonomous manufacturing systems, DECOUPLED MOLDING III stands as a benchmark for how automation should be implemented—at the core of the process itself.

Automated Process Control is no longer about dashboards, alarms, or reacting faster than yesterday. As we look toward 2026, it’s about something more ambitious—and more practical: building injection molding processes that can adapt, stabilize, and protect profitability on their own, even as materials, labor, and demand continue to change.

For RJG, this isn’t a sudden pivot. It’s the next chapter in more than 40 years of helping manufacturers make better parts, beginning in 1985 and continuing through today’s most advanced sensor-driven and AI-enabled systems.

What’s changing is not the goal—but the speed, intelligence, and autonomy with which modern processes can now respond.

This article outlines what RJG is building on the road to Autonomous Process Control, how recent innovations—including iMFLUX low constant pressure molding—fit into that strategy, and why many manufacturers are seeing measurable cost reduction and profitability improvements in as little as 3 months.

---

Why 2026 Is a Turning Point for Autonomous Process Control

Injection molding has always balanced three forces:

1. Cost pressure (materials, labor, energy)
2. Quality expectations (tighter tolerances, zero-defect mindsets)
3. Operational reality (staffing shortages, variability, aging equipment)

In recent years, those forces have intensified. Resin variability has increased. Skilled labor is harder to find and retain. Customers expect consistency even when materials and volumes change.

At the same time, the industry now has access to something it didn’t before:

• Scalable plant-wide data infrastructure
• Validated digital process control
• AI-based decision support grounded in proven molding science

Together, these enable a shift from reactive control to predictive and autonomous control—where problems are identified earlier, adjustments are made faster, and bad parts are contained or prevented altogether.

---

From Monitoring to Autonomy: A Practical Definition  

Lights out manufacturing doesn’t happen all at once. It evolves through stages:

• Monitoring – Seeing what happened
• Containment – Catching bad or suspect parts
• Prediction – Recognizing early warning signals
• Autonomous action – Adjusting the process in real time to stay within control

RJG’s roadmap is intentionally designed to support manufacturers at any point along this maturity curve, without forcing them to abandon what already works.

---

The Margin Problem: Where Profits Are Quietly Lost  

Most molding operations don’t lose money in dramatic failures—they lose it quietly:

• Scrap that slowly increases over time
• Sorting labor because quality confidence is low
• Extended startups and changeovers
• Conservative material choices because variability feels risky

Lower-cost and recycled resins are increasingly available—but without the ability to see and control what’s happening in the mold, many teams can’t use them confidently.

This is where Automated Process Control moves from “nice to have” to strategic advantage.

---

RJG’s Foundation: 40 Years of Proven Process Control  

For existing RJG customers, this foundation is familiar. For new readers, it’s worth stating plainly:

RJG’s strength has never been a single product—it’s the combination of method, measurement, and training that allows teams to create repeatable, transferable processes across people, machines, and facilities.

From cavity pressure–based control to Master Molding methodologies, RJG has consistently focused on controlling the process at the point where the plastic becomes the part.

Everything being built in?2026 extends that same philosophy.

---

Immediate Wins: Catching Bad Parts with CoPilot GO  

Autonomy starts with visibility and containment.

CoPilot GO is designed to deliver value quickly by helping manufacturers:

• Catch short shots and suspect parts immediately
• Begin process monitoring without complex machine interfaces
• Improve confidence during tool trials and startups

By focusing on fast deployment and clear feedback, CoPilot GO helps plants stop paying for uncontrolled shots while laying the groundwork for more advanced control strategies.

Learn more about CoPilot GO:
https://rjginc.us/copilot-go/0001.html

---

The Hub: Turning Process Data into Profit  

Once data is available, it must become actionable.

The Hub centralizes process data across machines and molds, helping teams:

• See which machines are making good, bad, or suspect parts
• Identify trends before failures occur
• Standardize visibility across shifts and sites
• Connect process data directly to manufacturing execution systems (EMS)

This shift—from asking “What went wrong?” to “What’s about to go wrong?”—is a critical step toward autonomy.

Learn more about The Hub:
https://rjginc.com/the-hub/

---

Validated Process Control: Confidence for Regulated Manufacturing  

In regulated industries such as medical molding, confidence must be documented—not assumed.

RJG’s achievement of FDA-approved validated status for CoPilot and The Hub represents a major milestone, enabling:

• IQ/OQ/PQ-aligned digital process control
• Easier process transfer across machines and facilities
• Reduced validation burden without sacrificing rigor

Why validated process control matters:
https://rjginc.com/why-validated-process-control-is-a-breakthrough-for-medical-injection-molders/

---

MAX (AI) Process Advisor: Scaling Expertise, Not Replacing It  

Automation doesn’t remove people from the process—it supports them.

MAX (AI) Process Advisor applies proven molding logic to real-time process data, helping teams:

• Interpret complex signals faster
• Receive consistent guidance aligned with Master Molding principles
• Reduce dependency on a small number of experts

This is especially important in labor-constrained environments, where consistency matters more than heroics.

Explore MAX:
https://rjginc.com/max2-ai-advisor-learn-more/

---

Evolution of Process Control Strategy  with DECOUPLED Molding® III   

A key milestone on the road to autonomy is RJG’s integration of low constant pressure molding technology.

At its core, low constant injection pressure processing allows the process to adapt automatically as conditions change—rather than relying solely on fixed velocity and pressure limits.

Learn more low constant pressure:
https://rjginc.com/imflux/

Complementing—not Replacing—Decoupled Molding III  

It’s important to be clear: Low constant pressure molding  does not replace Decoupled Molding III (DMIII).

DMIII remains a powerful and proven methodology—especially for:

• Velocity-sensitive applications
• Tight dimensional tolerances
• Facilities standardized on traditional Master Molding practices

More on Decoupled Molding III:
https://rjginc.com/decoupled-molding-iii-paving-the-way-for-quality-molding-with-less-staffing/

Instead, we expand the RJG toolkit in 2026 with the next Autonomous Process.

Low constant pressure molding is particularly valuable when:

• Material variability is high
• Recycled or lower-cost resins are in use
• Clamp force or machine size is a constraint
• Staffing experience levels vary

By integrating different processing methodologies with RJG’s sensors, CoPilot and The Hub, manufacturers can deploy different control strategies for different molds—without sacrificing visibility or quality standards.

Autonomous Process Control isn’t about one philosophy. It’s about choosing the right control approach for each application, supported by a unified data and intelligence layer.

---

Heat and Cool Feature on the CoPilot

Autonomy still depends on physics.

RJG’s in-cavity sensor technology provides the most direct insight into what’s happening inside the mold—making it possible to:

• Detect drift early
• Troubleshoot faster
• Compensate for material variation

Sensor solutions:
https://rjginc.com/sensors/

New Heat & Cool technology further tightens control by ensuring the mold reaches optimal conditions before injection and transitions phases precisely.

Heat & Cool overview:
https://rjginc.com/copilot-heat-cool-control

---

Sustainability That Improves the Bottom Line  

Sustainability and profitability no longer have to compete.

Cavity pressure–based control enables manufacturers to:

• Use recycled or lower-cost materials more confidently
• Reduce scrap and rework
• Maintain consistent quality despite resin variability

Sustainability in injection molding:
https://rjginc.com/sustainability-in-injection-molding/
Cavity pressure and recycled materials:
https://rjginc.com/how-cavity-pressure-control-is-changing-plastics-manufacturing-enabling-the-use-of-recycled-materials-in-injection-molding/

---

Training, Partnerships, and Enablement  

Technology delivers results only when people know how to use it.

RJG continues to invest in:

• Public training and eLearning programs
  https://rjginc.com/academy/public-training-registration/
• Live and on-demand webinars
  https://rjginc.com/resource/webinar/
• Industry partnerships with organizations such as MAPP, StackTeck, Kaseya, and Engle
• Educational video content on YouTube
  https://www.youtube.com/@rjg/videos

These resources ensure that autonomy isn’t theoretical—it’s achievable.

---

What ROI Looks Like: 3 Months to 1 Year  

Most manufacturers see value in phases:

0–3 months

• Faster containment of bad parts
• Reduced startup and troubleshooting time

3–6 months

• Improved process stability
• Reduced scrap and labor variability

6–12 months

• Confident use of alternative materials
• Predictable output and improved margins

To quantify potential gains, RJG offers a practical ROI calculator:
https://rjginc.com/roi-calculator/

---

A Practical Next Step: See Where Your Gaps Are  

Autonomous Process Control is not an all-or-nothing leap. It’s a series of smart, connected improvements.

For many organizations, the most effective next step is simply to understand where their current processes are vulnerable—and where targeted changes could unlock the biggest return. 

RJG’s Gap Assessment is designed to do exactly that.

See where your gaps are:
https://rjginc.com/solutions/gap-assessment/