LYNX STRAIN GAUGE | RJG, Inc.

MCSG-125

RJG Import — Sat, 08 Sep 2018 22:38:59 +0000

Sensor	English	S.I.
Force Range per model
MCSG-B-127-125	125 lb	.56 kN
Accuracy	1.25% Full Scale	1.25% Full Scale
Maximum Temperature - Connector	185 °F	85 °C
Maximum Temperature - Standard Sensor Head	250 °F	121 °C
Maximum Temperature - Hi-Temp Sensor Head	425 °F	218 °C

MCSG-2000

RJG Import — Sat, 08 Sep 2018 22:38:59 +0000

Sensor	English	S.I.
Force Range per model
MCSG-B-127-2000	2000 lb	8.9 kN
Accuracy	1.25% Full Scale	1.25% Full Scale
Maximum Temperature - Connector	185 °F	85 °C
Maximum Temperature - Standard Sensor Head	250 °F	121 °C
Maximum Temperature - Hi-Temp Sensor Head	425 °F	218 °C

MCSG-500

RJG Import — Sat, 08 Sep 2018 22:38:59 +0000

Sensor	English	S.I.
Force Range per model
MCSG-B-127-500	500 lb	2.23 kN
Accuracy	1.25% Full Scale	1.25% Full Scale
Maximum Temperature - Connector	185 °F	85 °C
Maximum Temperature - Standard Sensor Head	250 °F	121 °C
Maximum Temperature - Hi-Temp Sensor Head	425 °F	218 °C

SG-8

RJG Import — Sat, 08 Sep 2018 22:38:59 +0000

8 Channel Sensor Plate with ID

The strain gage Sensor Plate with Mold ID allows users to interface up to 8 multi-channel strain gage sensors while maintaining a small mold footprint.

SG/LX8-S-ID

RJG Import — Sat, 08 Sep 2018 18:38:59 +0000

Lynx™ 8 Channel Strain Gage Adapter with ID

The Lynx 8 Channel Strain Gage Adapter provides strain gage cavity pressure sensor users with a convenient, simple interface to multi-channel strain gage systems.

Information on the old version of the adapter can be found here.

LSB127-50

RJG Import — Sat, 08 Sep 2018 18:38:58 +0000

Range	50 lb
Accuracy	+/- 0.75%
Standard Cable Lengths	0.2m, 0.4m, 0.6m, 0.8m, 1.2m, 1.6m, and 2.0m
Max Temp. (sensor)	Standard 250 °F/121.1 °C Hi-Temp 425 °F/218.3 °C
Max Temp. (case)	140 °F/60 °C
Sensing Element	Strain Gage

LSB127-500

RJG Import — Sat, 08 Sep 2018 18:38:58 +0000

Range	500 lb
Accuracy	+/-0.5%
Standard Cable Lengths	0.2m, 0.4m, 0.6m, 0.8m, 1.2m, 1.6m, and 2.0m
Max Temp. (sensor)	Standard 250 °F/121.1 °C Hi-Temp 425 °F/218.3 °C
Max Temp. (case)	140 °F/60 °C
Sensing Element	Strain Gage
Note: Cable lengths are required at the time of order. Cables over 48” have an additional $50.00 charge.

LSB159-4000

RJG Import — Sat, 08 Sep 2018 18:38:58 +0000

Range	4,000 lb
Accuracy	+/- 0.75%
Standard Cable Lengths	0.2m, 0.4m, 0.6m, 0.8m, 1.2m, 1.6m, and 2.0m
Max Temp. (sensor)	Standard 250 °F/121.1 °C Hi-Temp 425 °F/218.3 °C
Max Temp. (case)	140 °F/60 °C
Sensing Element	Strain Gage
Note: Cable lengths are required at the time of order. Cables over 48” have an additional $50.00 charge.

LS-DP-100 – Discontinued

RJG Import — Sat, 08 Sep 2018 22:38:58 +0000

Lynx Delta Pressure Sensor

This sensor measures the difference in coolant pressure between the mold inlet and outlet and is designed to be used with the eDART^® System. It provides information about the cooling capability and consistency supplied to the molded part.

LS-MD-040

RJG Import — Sat, 08 Sep 2018 22:38:58 +0000

Mold Deflection Sensor

The Mold Deflection Sensor measures how much the mold parting line opens on each cycle. The indirect style sensor mounts in the clamp plate with a 5/16” ejector pin protruding .040” into the parting line area of the mold (not into the cavity). The pin transmits force through a spring to a Lynx^™ force sensor that is calibrated to measure deflection.

When the mold clamps, the pin is pressed flush with the parting line, and the full force is applied to the sensor—this is recorded as “zero deflection”. As the mold “cracks”, the force decreases. For each incremental decrease in force, the sensor reports an increase in deflection. The sensors are calibrated to assume .040” (1.016 mm) maximum deflection.

Features and benefits:

Auto calibration on each cycle with eDART^® software
Easy access to the assembly without disassembling the mold
Minimize part dimensional changes from machine to machine
Resolve mold deflection issues
Resolve clamp force adequacy issues
Resolve mold robustness issues