Hardware | RJG, Inc. https://rjginc.com Award-Winning Training and Technology Company Wed, 31 Jul 2024 14:32:44 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://rjginc.com/wp-content/uploads/2021/10/cropped-group@3x-100x100.png Hardware | RJG, Inc. https://rjginc.com 32 32 OA1-D-V – Discontinued https://rjginc.com/product/oa1-d-v/ Sat, 08 Sep 2018 22:38:59 +0000 https://rjginc.com/product/oa1-d-v/ Lynx Analog Output Module

The Lynx 0-10V Analog Output Module is an isolated analog output din-rail module that can output a 0-10V DC signal. It can be used to interface with any sensor or input that accepts a 0-10V DC signal.

]]> OR2-D – Discontinued https://rjginc.com/product/or2-d/ Sat, 08 Sep 2018 22:38:59 +0000 https://rjginc.com/product/or2-d/ Lynx Dual Relay Output Module

For machines and automation equipment that accept digital signals, this din-rail device provides a normally open or normally closed contact for process control or part sorting.

]]> PZ/LX1-S https://rjginc.com/product/pz-lx1-s/ Sat, 08 Sep 2018 22:38:59 +0000 https://rjginc.com/product/pz-lx1-s/ Range 0 - 20000 pC Accuracy ±1% Max. Temp. (Operating) 140° F Warm-up Time 5 minutes ]]> Surface Mount Piezo Adapter

This sensor adapter allows standard piezoelectric sensors to be connected to RJG’s process control systems. It accepts inputs from any piezo sensor, scales the input signal from the sensor, and sends a digital cavity pressure signal to the process controller. Because the piezo adapter is a self-identifying, digital sensor, the process control system will automatically ask the user for pertinent setup information.

Due to the piezo adapter’s high resolution and low drift ratings, there is no need to switch ranges when changing sensors or applications. This simplifies the process when working with small pin sizes or applications with low pressures. The two-inch housing unit is much smaller than other piezo sensor amplifiers on the market, allowing for easy installation, even if available space is limited.

Features and benefits:

  • High digital resolution
  • Low drift
  • Compact size
  • Works with any piezo sensor
  • Self-identifying “smart” sensor
]]> SG/LX1-S https://rjginc.com/product/sg-lx1-s/ Sat, 08 Sep 2018 22:38:59 +0000 https://rjginc.com/product/sg-lx1-s/ Power (supplied by eDART™) 12VDC Current Draw 45mA Supplied Excitation Voltage 5.000V Maximum Differential Input Voltage 10.00mV ]]> Surface Mount Sensor Adapter

This sensor adapter allows standard strain gage sensors to be connected to RJG’s process control systems.

]]> SUMI-LX – Discontinued https://rjginc.com/product/sumi-lx/ Sat, 08 Sep 2018 22:38:59 +0000 https://rjginc.com/product/sumi-lx/ Sumitomo Interface Box

The RJG Sumitomo Machine Interface (SUMI-LX, SUMI-LX/HS) provides an easy interface between Sumitomo molding machines and RJG’s process control systems.

]]> DIN/LX-D – Discontinued https://rjginc.com/product/din-lx-d/ Sat, 08 Sep 2018 22:38:58 +0000 https://rjginc.com/product/din-lx-d/ Lynx Communications Adapter

The DIN/LX-D is a Lynx to DIN rail communications module that acts as an interface between standard Lynx cables and Lynx DIN rail mounted modules when not using an ID7-D-SEQ Sequence Module.

]]> eDART https://rjginc.com/product/edart/ Sat, 08 Sep 2018 22:38:58 +0000 https://rjginc.com/product/edart/ The eDART® process controller is the base hardware unit for the eDART System.

]]> CoPilot/eDART STAND – Discontinued https://rjginc.com/product/edart-stand/ Sat, 08 Sep 2018 22:38:58 +0000 https://rjginc.com/product/edart-stand/ RJG‘s CoPilot/eDART® stand is a rugged, stylized stand for holding an CoPilot/eDART, monitor, keyboard, and mouse. It is a compact option for housing the equipment needed to run an eDART or CoPilot System and can be located near the press for easy access.

The height of the stand’s VESA standard monitor is adjustable and pivots for ergonomic placement. The keyboard tray/mouse platform is also adjustable and the wheels make it easily portable.

Features and benefits:

  • Monitor mount is height adjustable up to 71″
  • Minimal 27.5″ diameter footprint saves space
  • Sit or stand to use
  • LCD mount tilts and swivels in all directions
  • Keyboard/mouse tray pivots and is removable for use with touchscreen monitor
  • Attaches to 75 mm (15″) or 100 mm (17″) monitor
]]> IA1-D-VI – Discontinued https://rjginc.com/product/ia1-d-vi/ Sat, 08 Sep 2018 22:38:58 +0000 https://rjginc.com/product/ia1-d-vi/ Lynx Analog Input Module

This din-rail module accepts 0-10V DC signals from analog sensors and equipment in order to integrate them into the eDART® System.

]]> LT3-1/2-xxx – Discontinued https://rjginc.com/product/lt3-1-2-xxx/ Sat, 08 Sep 2018 22:38:58 +0000 https://rjginc.com/product/lt3-1-2-xxx/ Lynx™ Indicator Light Tree

The Lynx Indicator Light Tree is a machine mountable, visual process indicator that is available in voltages of 24 VDC and 120 VAC. This simple-to-install product allows the status of a running molding machine to be clearly viewed from a distance on the plant floor. It is designated to be used with the eDART® software to indicate if your process is running within its preset limits.

The process status is indicated by the colored light. A green light signifies the process is running within its preset limits. A yellow light means there is a potential problem and close inspection is recommended. The red light alerts plant floor personnel to a problem with the process that needs immediate attention.

The light tree provides molders with more freedom to tend to other projects on the plant floor while still keeping an eye on running jobs.

]]>