The 1 mm Flush Mount Temperature Sensor is a tool used to analyze temperature variation inside the mold cavity. It is small enough to be installed in both small, simple molds and large, complex molds. This sensor also has a machinable tip, allowing for contouring to a mold’s surface geometry.

Available cable lengths include 0.5m, 1.0m, and 2.0m.

Features and benefits:

• 1 mm diameter
• Type K thermocouple
• Flush mount
• Sensor tip good up to 752° F
• Machinable tip

The Press Fit Cavity Temperature Sensor is a tool used to analyze temperature variation inside the actual mold cavity. These sensors work in conjunction with RJG’s process control systems to assist molders in diagnosing processing problems relating to temperature issues. The temperature of both the melt and mold make up two of the four plastic variables that determine how a part is formed.

The Press Fit Cavity Temperature Sensor is simple to install. Simply drill a small hole for the wire and a flat bottomed pocket with the tolerance necessary to press fit the device in from the cavity face.

Available cable lengths: 1.8M, 2.5M

Features and benefits:

• 3 mm in diameter and 4.5 mm long
• Type K thermocouple
• Sensors can withstand cavity pressures up to 30,000 psi
• Teflon wire coating allows the sensors to work in molds up to 400° F
• 1 ms response time to see a 1-2° C temperature rise
• Reduces installation costs by over 50%
• Made of hardened steel
• Sensor head can be textured or contoured

The 1.5 mm Spring Loaded Temperature Sensor is used to analyze temperature variation inside the mold cavity. It is easy to install and remove, which greatly simplifies mold preventative maintenance. The sensor utilizes an adjustable aluminum bayonet connector system to accommodate variable plate depth and spring load.

Available cable lengths include 0.5m, 1.0m, and 2.0m.

Brass adapter model number: TS-SL

Features and benefits:

• 1.5 mm diameter
• Type K thermocouple
• Spring loaded
• Sensor tip good up to 1562° F
• Installation leaves no witness mark
• Easy installation and removal simplifies preventative maintenance

Connecting these sensors with new and existing thermocouples provides insight into the key process variables. Thermocouple sensors give you the ability to track barrel zone, mold, and mold coolant temperatures.

Connecting these sensors with new and existing thermocouples provides insight into the key process variables. Thermocouple sensors give you the ability to track barrel zone, mold, and mold coolant temperatures.

Also available in a high temp model LS-QTTB-K-H.