Mold Deflection | RJG, Inc. https://rjginc.com Award-Winning Training and Technology Company Wed, 23 Nov 2022 11:34:04 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.7 https://rjginc.com/wp-content/uploads/2021/10/cropped-group@3x-100x100.png Mold Deflection | RJG, Inc. https://rjginc.com 32 32 LS-MD-040 https://rjginc.com/product/ls-md-040/ Sat, 08 Sep 2018 22:38:58 +0000 https://rjginc.com/product/ls-md-040/ Range 0.040" Resolution 3x10-5" Standard Cable Lengths 12”,24”,36”,48” Max Temp. (sensor) Standard 250°F/121.1°C Hi-Temp 425°F/218.3°C Max Temp. (case) 140°F/60°C Sensing Element Strain Gage ]]> Mold Deflection Sensor

The Mold Deflection Sensor measures how much the mold parting line opens on each cycle. The indirect style sensor mounts in the clamp plate with a 5/16” ejector pin protruding .040” into the parting line area of the mold (not into the cavity). The pin transmits force through a spring to a Lynx™ force sensor that is calibrated to measure deflection.

When the mold clamps, the pin is pressed flush with the parting line, and the full force is applied to the sensor—this is recorded as “zero deflection”. As the mold “cracks”, the force decreases. For each incremental decrease in force, the sensor reports an increase in deflection. The sensors are calibrated to assume .040” (1.016 mm) maximum deflection.

Features and benefits:

  • Auto calibration on each cycle with eDART® software
  • Easy access to the assembly without disassembling the mold
  • Minimize part dimensional changes from machine to machine
  • Resolve mold deflection issues
  • Resolve clamp force adequacy issues
  • Resolve mold robustness issues

]]>