Tracking injection velocity, shot volume, cushion, and plasticizing rates is as simple as connecting a stroke/velocity sensor. The LE-R-50 is a molding machine mountable linear position/velocity sensor designed to be used with RJG’s process control systems. The Stroke-Velocity Encoder can be used to monitor standard screw position and speed on most injection molding machines.

The IA2-M-DFT Lynx Flow-Temperature Interface Module provides all the inputs and outputs needed to interface RJG’s process control systems to Smartflow^®’s TracerVM™ and TracerVM™ with user interface line of flowmeters. This din-rail module is shielded to ensure high quality data even in rugged molding environments.

This isolated, analog output module can be used to interface with any sensor, or input, that accepts a 0-10V DC signal, like plastic and hydraulic pressure input cards. It can also be used as an external machine transfer.

Once mounted, the connectors allow the unit to be interfaced with other Lynx DIN rail modules and RJG’s process control systems. Each machine panel installation of one or more DIN rail modules requires either an ID7-M-SEQ or a DIN/LX-M to terminate the DIN rail module chain.

Features and benefits:

• Easier installation and troubleshooting
• Increased immunity to interference in electronically noisy environments
• Convenient 35 mm DIN rail mounting
• Removable/replaceable cables

The dual contact closure output module is designed to be used with RJG’s process control systems. The module’s two dry contact outputs can also be configured to implement part containment or transfer a molding machine.

Once mounted, the connectors allow the unit to be interfaced with other Lynx DIN rail modules as well as process control systems. Each machine panel installation of one or more DIN rail modules requires either an ID7-M-SEQ or a DIN/LX-M to terminate the DIN rail module chain.

Features and benefits:

• Easier installation and troubleshooting
• Increased immunity to interference in electronically noisy environments
• Convenient 35 mm DIN rail mounting
• Easy-to-read status LEDs
• Removable/replaceable cables

What you can do:

• Determine if the water temperature control unit is delivering the correct temperature needed to make good parts
• Reject parts if the flow or temperature doesn’t meet your set requirements to make a good part
• Create a template of the flow or water temperature
• Overlay your GPM or temperature curves on the cycle graph
• Set alarms around peak values of the flow or temperature of the coolant
• Set excessive rejects to stop the machine if the flow or temperature of the coolant rejects parts more than your set thresholds

This sensor adapter allows standard piezoelectric sensors to be connected to RJG’s process control systems. It accepts inputs from any piezo sensor, scales the input signal from the sensor, and sends a digital cavity pressure signal to the process controller. Because the piezo adapter is a self-identifying, digital sensor, the process control system will automatically ask the user for pertinent setup information.

Due to the piezo adapter’s high resolution and low drift ratings, there is no need to switch ranges when changing sensors or applications. This simplifies the process when working with small pin sizes or applications with low pressures. The two-inch housing unit is much smaller than other piezo sensor amplifiers on the market, allowing for easy installation, even if available space is limited.

Features and benefits:

• High digital resolution
• Low drift
• Compact size
• Works with any piezo sensor
• Self-identifying “smart” sensor

This sensor adapter allows standard strain gage sensors to be connected to RJG’s process control systems.

LS-H-1/4NPT-3K
LS-H-1/4NPT-5K

RJG’s process control systems calculate injection pressure and plots it along with other profiles. These curves provide many machine and process variables, displaying hydraulic consistency and repeatability over time.

The DIN/LX-M is a Lynx to DIN rail communications module that acts as an interface between standard Lynx cables and Lynx DIN rail mounted modules when not using an ID7-M-SEQ. This DIN rail module is shielded to ensure high quality data even in rugged molding environments. It is designed to be used with RJG’s process control systems and to be mounted on standard 35 mm DIN rails often found in machine panels.

This module accepts 0-10V DC signals from analog sensors and equipment in order to integrate them into RJG’s process control systems. This din-rail module is shielded to ensure high quality data even in rugged molding environments. Examples of sensors that can be used with this module include: electric machine injection pressure, temperature, dew point, and plastic pressure.

Once mounted, the connectors allow the unit to be interfaced with other Lynx DIN rail modules and the process control system. Each machine panel installation of one or more DIN rail module requires either an ID7-M-SEQ or a DIN/LX-M to terminate the DIN rail module chain.

Features and benefits:

• Easier installation and troubleshooting
• Increased immunity to interference in electronically noisy environments
• Convenient 35 mm DIN rail mounting
• Removable/replaceable cables