This course provides mold makers, design engineers, and molders with the common language and core knowledge required to successfully design robust injection molds that meet cycle time, cost, part quality, and lead time requirements.
Class topics address good manufacturing practices (GMP) for part design, including fundamental material characteristics, necessary processing techniques, and molding non-conformities, with a focus on robust mold design.
"To couple factual basis, industry proven experience, and RJG’s scientific perspective together with hands on exercises and real world discussion was extremely valuable to me."
Chuck Hampston, Project Engineer at Extreme Tool and Engineering
"Even as a well-seasoned Tooling and Process Engineer, I had many aha moments during the 3 day course. It was well worth the time, and should be mandatory training if you work with injection molds."
Mike Von Holtz, Tooling Engineer at Gentex Corporation
Since hands-on-learning is a core component of our training, we will utilize industry examples as a reference, and then dive directly into evaluating and improving your designs.
|Start Date||End Date||Name||Language||City||State||Online||Open Seats||Cost ($USD)|
|07/31/2018||08/02/2018||Mold Design for Injection Molding||English||Gibsonville||NC||No||8||$1,895||Register|
|08/28/2018||08/30/2018||Mold Design for Injection Molding||English||Windsor||ON||No||18||$1,895||Register|
|09/18/2018||09/20/2018||Mold Design for Injection Molding||English||Traverse City||MI||No||18||$1,895||Register|
|10/02/2018||10/04/2018||Mold Design for Injection Molding||English||Gibsonville||NC||No||17||$1,895||Register|
Current Waiting List Size:
We encourage you to register for a course that has an open seat. In the rare event a seat does open in a filled class, we will contact those on the waiting list via e-mail.